Lonseal #650 Two-Part Epoxy for Flooring

Key Features: Lonseal #650 Two-Part Epoxy for Flooring

• Wet set adhesive
• CRI Green Label Plus Certified #GLP59909
• Applications:
  • Properly prepared, non-porous substrates and existing vinyl floors
  • Locations with temperature extremes, such as saunas, cold-storage, or walk-in freezers
  • Areas where flooding is possible, including around drains, shower areas, public bathrooms, pool/whirlpool aprons, or laundry rooms
  • Areas expecting heavy point loading or heavy/dynamic rolling loads, like hospital beds
  • Can be used on properly prepared, non-porous substrates and existing vinyl floors

Application Information:

• Adhesive must be applied by a trowel with 1/16" x 1/32" x 1/32" U-Notches (Model ZZ800 Trowel Sold Separately). These specs are specifically recommended by the adhesive MFG. If applied incorrectly the flooring will not lay properly.
• Approx. Spread rate: Half-gallon: 85-100 square feet; Gallon: 170 - 225 sq. ft. *
• Open time: Up to 15 minutes
• Working time: Up to 15 minutes

Notes: Trowel sizes listed are by width/depth/space. All information provided above will vary depending on the job site conditions, including temperature, humidity, substrate porosity, and applicator.

*Actual job site spread rate will vary depending on the substrate conditions.

OPEN TIME: Waiting time required before placing the flooring material into the adhesive.

WORKING TIME: Amount of time for the adhesive to accept the flooring material after being applied to the substrate.

Specifications: Lonseal #650 Two-Part Epoxy for Flooring

• Size: 1/2 Gallon, 1 Gallon
• Style: 2-Part Epoxy

Documents: Lonseal #650 Two-Part Epoxy for Flooring

Technical Data Sheet

Safety Data Sheet

Lonseal Vehicle installation (PDF)

Video: Lonseal #650 Two-Part Epoxy for Flooring